Dual Remote Controllers Mode - dji MATRICE 600 User Manual

MATRICE 600 User Manual
Optimal Transmission Range
The signal transmission between the aircraft and the remote controller performs best when the aircraft
is within the optimal transmission range. Open up the antennas on the remote controller to optimize
transmission range. Ideally, the flat surface of the antenna should be facing the aircraft. If the signal is
weak, fly the aircraft closer to you.
Strong

Dual Remote Controllers Mode

More than one remote controller can be connected to the same aircraft in the Dual Remote Controllers
mode. When using a DJI gimbal in the Dual Remote Controllers mode, the Master remote controller
controls the movement of the aircraft, while the Slave remote controller controls the movement of
the gimbal. When multiple Slave remote controllers (max 3) are connected to the aircraft, only the
first connected Slave remote controller is able to control the gimbal. The remaining Slave remote
controllers can view the live feed video from the aircraft and set the camera parameters, but cannot
control the gimbal.
Use the gimbal dial on the remote controller to tilt the camera in the Single Remote Controller
mode. In Dual Remote Controllers mode, use the Slave remote controller to tilt, pan or roll the
camera.
28
©
2016 DJI All Rights Reserved.
Optimal Transmission Range
Weak
Master Remote
Controller
Slave Remote
Controller