Appendix B - User Defined Menu - Newtec AZ110 User Manual

Appendix B – User
Defined Menu
APPENDIX B – USER DEFINED MENU
The user menu can be configured according to the customers needs. In this way,
the user can create a quick access to those control, monitor and testing
parameters that he needs to change or monitor regularly. In addition, the user can
also change the order in which the menu items are presented to meet his specific
demands. This is very useful in, for example, DSNG applications. Pre-configure the
general parameters and store them in the default boot-configuration. Then make all
relevant parameters that need a quick change during link setup available as a
group in the user menu. By doing this, an inexperienced user can operate the
modulator without having to go through all the different menus. A typical example
would be to group the parameters
while leaving all other parameters untouched.
Define the user menu
 Choose AZ110 > Unit > Setup > User menu and click OK.
AZ110/Unit/Setup

User menu: <press OK, ESC when done>

 Choose AZ110 > Unit > Setup > User menu and click OK. This brings up the first
item from the AZ110 > Control menu:
AZ110/Control

Base band interface

 Click OK to add this menu to the list of menu items that is visible in the user menu
or press the 'right arrow' key to move to the next menu item in the control, monitor
and test menu. The available list contains all the menu items when the user profile
expert.
 Click OK to change the display to:
AZ110/Control present

Base band interface <OK> to remove

The above indicates that this menu item is present in the user menu. To remove it,
click OK again.
version 3.2
101
User Manual for AZ110 Broadcast Satellite Modulator with ASI interface
output
not present
<OK> to add
After a "reset to factory defaults" the user menu contents are
removed.
SHAPING THE FUTURE SATELLITE OF COMMUNICATIONS
frequency, output level and transmit