Figure 25: Connecting A Fiber Optic Cable To An Sfp Transceiver - Allied Telesis AT-XS916MXT Installation Manual

Chapter 4: Cabling the Networking Ports
54
7. Connect the fiber optic cable to the transceiver, as shown in Figure 25.
The connector on the cable should fit snugly into the port, and the tab
should lock the connector into place.
Figure 25. Connecting a Fiber Optic Cable to an SFP Transceiver
8. Repeat this procedure to install a second transceiver.
9. After installing the transceivers, go to Chapter 5, "Powering On the
Switch" on page 55.