Installing The Switch In An Equipment Rack; Installing Two Switches In One Row; Installing A Switch In One Row; Figure 10: Rack Installation Options For The Xs916Mxseries Switch - Allied Telesis AT-XS916MXT Installation Manual

Installing the Switch in an Equipment Rack

Installing Two
Switches in One
Row
Installing a
Switch in One
Row
You can install one XS916MX series switch in a row of the equipment rack
or two XS916MX series switches in one row of the equipment rack as
shown in Figure 10.
Figure 10. Rack Installation Options for the XS916MXSeries Switch
To install two switches in one row of the equipment rack, use the AT-
BRKT-J15 rack mount kit.
Here are the guidelines:
You must purchase the AT-BRKT-J15 rack mount kit separately.

For the instructions using the AT-BRKT-J15 rack mount kit, see

The AT-x230-10GP, AT-AR3050S, AT-AR4050S, and XS916MX
Series Switches Rack Mount Installation Guide.
To install the switch in one row of the equipment rack, you need the
following items:
Rack mount bracket kit, which comes with the switch

Flat-head screwdriver

Cross-head screwdriver

Note
You must provide flat-head and cross-head screwdrivers.
To install the switch in one row of the equipment rack, perform the
following procedures.
XS916MX Series Installation Guide for Stand-alone Switches
43