Figure 14: Installing The Brackets On The Switch; Figure 15: Mounting The Switch In An Equipment Rack - Allied Telesis AT-XS916MXT Installation Manual

6. Attach the two rack mount brackets to the sides of the switch with the
eight bracket screws as shown in Figure 14.
Figure 14. Installing the Brackets on the Switch
7. While another person holds the switch in the equipment rack, secure it
with standard equipment rack screws as shown in Figure 15.
Figure 15. Mounting the Switch in an Equipment Rack
8. Go to Chapter 4, "Cabling the Networking Ports" on page 49, to
connect the network cables to the ports on the switch.
XS916MX Series Installation Guide for Stand-alone Switches
45