Allied Telesis AT-XS916MXT Installation Manual page 37

Warning
To reduce the risk of electric shock, the PoE ports on this product
must not connect to cabling that is routed outside the building where
this device is located.
Caution
The unit does not contain serviceable components. Please return
damaged units for servicing.
Warning
When you remove an SFP module from this product, the case
temperature of the SFP may exceed 40° C (158° F). Exercise
caution when handling with unprotected hands.
Caution
You have to reset the switch to disable the VCStack feature. Some
network traffic may be lost if the device is already connected to a live
network. E75

Caution
Disabling the VCStack feature requires resetting the switch. If the
switch is already connected to a live network, some network traffic
may be lost. E75A

Warning
Switches should not be stacked on top of one another on a table or
desktop because that could present a personal safety hazard if you
need to move or replace switches.
Warning
A transceiver can be damaged by static electricity. Be sure to
observe all standard electrostatic discharge (ESD) precautions,
such as wearing an antistatic wrist strap, to avoid damaging the
device. E77

XS916MX Series Installation Guide for Stand-alone Switches
E40

E42

E76

E43

37