Switch Id Led; Figure 7: Switch Id Led; Table 4: S1 And S2 Slot Leds - Allied Telesis AT-XS916MXT Installation Manual

Switch ID LED

LED State
Link/Activity Off
Solid green
Flashing
green
The Switch ID LED, shown in Figure 7, displays the ID number of the
switch. A stand-alone switch has the ID number 0. Switches in a VCStack
have the numbers 1 to 2. Chapter 5, "Powering On the Switch" on page 55
has the procedure for verifying and, if necessary, changing the ID number
of the switch.
The states of the LED when the switch is not operating in the low power
mode are shown in Figure 8 on page 28.
XS916MX Series Installation Guide for Stand-alone Switches
Table 4. S1 and S2 Slot LEDs
The slot is empty, the stacking transceiver
has not established a link to a network
device, or the LEDs are turned off. To turn
on the LEDs, use the eco-friendly button.
The stacking transceiver has established
a link to another switch in the stack.
The stacking transceiver is receiving or
transmitting packets.
Switch ID LED
Figure 7. Switch ID LED
Description
27