Safety Instructions - Ahlborn ALMEMO 710 Operating Instructions Manual

4. Safety instructions

4. SAFETY INSTRUCTIONS
DANGER Danger to life and limb, risk of damage to equipment
Before starting to operate the device, please read the in-
structions carefully.
Please ensure that you comply with all general safety ad-
vice and the special safety instructions included in other
chapters.
Such risks may occur in the following circumstances :
•
•
•
•
•
•
DANGER Risk of fatal injury through exposure to dangerously high
voltage.
Such risks may occur in the following circumstances :
•
•
•
•
DANGER Warning - explosive atmospheres or substances.
In the vicinity of various fuels or chemicals there is a risk of ex-
plosion.
Do not use the device in the vicinity of blasting work or filling
stations.
8 ALMEMO
Failure to heed the operating instructions and all the safety
notes these contain
Any form of unauthorized tampering or alteration inside the de-
vice
Use of the device in environments or conditions for which it is
not suited
Use of the device with an unsuitable power supply and / or in
conjunction with unsuitable peripheral equipment
Use of the device for any purpose other than that for which it is
intended
Damage caused by electrostatic discharge or lightning.
Use of the device with an unsuitable power supply and / or
in conjunction with unsuitable peripheral equipment
Damage caused by electrostatic discharge or lightning
Do not run sensor lines in the vicinity of high-voltage power
cables.
Before you touch any sensor lines, ensure that all static
electricity has been discharged.
® 710