Safety Instructions - Ahlborn ALMEMO 2470-1S Operating Instruction

4. SAFETY INSTRUCTIONS

DANGER Danger to life and limb, risk of damage to equipment
Before starting to operate the device, please read the in-
structions carefully.
Please ensure that you comply with all general safety ad-
vice and the special safety instructions included in other
chapters!
Such risks may occur in the following circumstances:
DANGER Risk of fatal injury through exposure to dangerously high
voltage
Such risks may occur in the following circumstances:
Failure to heed the operating instructions and all the
•
safety notes these contain
Any form of unauthorized tampering or alteration in-
•
side the device
Use of the device in environments or conditions for
•
which it is not suited
Use of the device with an unsuitable power supply
•
and / or in conjunction with unsuitable peripheral
equipment
Use of the device for any purpose other than that for
•
which it is intended
Damage caused by electrostatic discharge or light-
•
ning.
Use of the device with an unsuitable power supply and
•
/ or in conjunction with unsuitable peripheral equip-
ment
Damage caused by electrostatic discharge or lightning
•
Do not run sensor lines in the vicinity of high-voltage
•
power cables.
Before you touch any sensor lines, ensure that all stat-
•
ic electricity has been discharged.
Safety instructions
ALMEMO ® 2470 7