Table of Contents
Advertisement
3 Safety Notes
→ The measuring modules are – depending on the type – able to measure
voltages, currents and powers for potentials above 50V. During operation
and especially when connecting the measuring module and the socket
adapter, make sure that you do not touch any high voltage components.
→ For the connection of the measuring modules for AC/DC signals and for the
connection of the socket adapter, use the supplied or equivalent touch-
protected connection cables.
→ The measuring module for DC signals must only be used for direct voltage
respectively direct current according to the measuring range indicated on
the type plate.
→ Be particularly careful that the current modules are always connected in
series to the consumer i.e. in an input lead, and that they must not be
directly connected to the voltage source. When using the socket adapter, the
corresponding sockets of the socket adapter and measuring module (A-A ,
V-V, COM-COM) must be connected to each other. The color of the sockets
must be observed here.
→ Never use the measuring device or the measuring module in wet or damp
environments.
→ Keep the plastic housing away from open fire and hot surfaces (e.g.
burners).
→ The measuring module and the socket adapter must no longer be used if
they are externally damaged or possibly no longer function after incorrect
connection.
→ In case the measuring module or the socket adapter was used for purposes
other than intended or was used incorrectly, we cannot accept any liability
for any damages caused as a result.
→ The protective function of the measuring module and socket adapter is
impaired if the devices are used in a manner not specified by the
manufacturer.
- 5 –
Advertisement
Table of Contents
