Measured Value Display; Channels List; Bar Chart - Ahlborn ALMEMO 710 Operating Instructions Manual

11. Measured value display

11. MEASURED VALUE DISPLAY
Having configured the time-based process control in menu ´Data logger´ we
recommended that you display the measured values from your own application
in the most suitable way possible. First select in the top line with tab :
measured value display options, then choose the most suitable display
channels list for all connected measuring channels (see 11.1)
bar chart for up to 4 selectable measuring channels (see 11.2)
line graph for up to 4 selectable measuring channels (see 11.3)
user menus configured according to your own requirements (see 11.4)
All measured value displays offer in the bottom line, just like the data logger, the
buttons Start / Stop

11.1 Channels list

The best overview of the measuring system with all measured values and the
parameters for all channels can be obtained via the menu ´Channels list´. This
first displays the measuring channel, channel designation, and the current
measured value and maximum / minimum values. The arrows > and < can be
used to access further columns; additional parameters can be programmed via
the field in the top line. All parameters can be selected, edited, and imple-
mented. Via the fields in the column ´Channel´ the user can also access a
´Measuring channel´ directly and have this displayed (see 12.1). Here all chan-
nel functions can be programmed (see 13.2).
In the ´Dual display´ option twice as many channels can be listed - but with just
channel number, designation, and measured value; default display mode can
be restored by means of ´Normal display´.

11.2 Bar chart

In the menu ´Bar chart´ the first 4 active channels are displayed, each with its
respective channel designation and measured value and also a bar chart with
automatic scaling.
Via selection box ´Channels´ or using the button ´Settings´ > ´Select channels´
any 4 channels, from all those available, can be selected for display.
On the next two pages the ´Scaling mode´ can be changed from ´Automatic´
to ´Fixed range´ with ´Maximum´ and ´Minimum´.
To have these settings saved permanently please use the key
36 ALMEMO
und Manual for controlling the measuring channel scan.
® 710
Save settings