Sensors; Measuring By Means Of A Measuring Channel - Ahlborn ALMEMO 710 Operating Instructions Manual

12. Sensors

12. SENSORS
The ´Sensors´ application, accessible via the
to the organization and functioning of individual sensors (see 9.2).
The first page provides a ´Sensor overview´ listing all connected sensors to-
gether with socket, sensor number, sensor designation, and minimum actual
measuring duration of each one, plus a symbol
channels assigned (see 10.1.2).
A sensor can be selected by means of field
´Sensor channels´ with channel number, channel designation, measured
value, and maximum and minimum values. The measured value functions can
be accessed by touching on them; all other sensors can also be selected di-
rectly via the socket number in the header. Selecting ´Settings´ gives access
to the special ´Sensor settings´, which can be used to configure the sensor
channels and the D6 and D7 sensors and to manage the calibration data.
Here too by means of field
ther processing.

12.1 Measuring by means of a measuring channel

The menu ´Measuring
channel´ can be ac-
cessed by selecting a
channel from the chan-
nels list; this displays a
measuring channel in
the largest available for-
mat with channel num-
ber, designation, and
units.
To check measured value status there are various symbols available; when
one of these is touched on, an explanatory text gives its meaning.
40 ALMEMO
> a ´Measuring channel´ can be selected for fur-
Selecting a different measuring channel
Measured value smoothed (see 13.2.2)
Relative value with respect to a reference value
Measured value modified with sensor correction or scaling
® 710
tab, is dedicated exclusively
indicating the number of
> this provides a display of all