User Menus; Functions - Ahlborn ALMEMO 710 Operating Instructions Manual

11. Measured value display

11.4 User menus

Looking at the standard measuring menus you might conclude that the display
of measured values and the various function combinations are not always ide-
ally suited to the requirements of your particular applications. In addition to all
the standard menus you can also call up a number of user menus; there are 3
user menus already preconfigured; other user menus can be freely configured,
saved, and reloaded as you require.
When the application ´User menus´ is
selected, an overview of all existing
user menus appears plus the further
option ´Add user menu´. If you touch
on this option a window appears for
entering the name, menu template,
and whether the menu is to be as-
signed more than one page. The template proposes an arrangement of func-
tion cells.
2 x 8 small cells
2 x 5 small cells and 2 large cells or
2 x 2 small cells and 4 large cells
Then an empty menu appears. You
can select all the functions you require
from the following functions list and
the associated channels and, by touching on the individual cells, allocate these
in any arrangement you want. For several fields it is possible, instead of the
fixed channel assignment, to set the ´Selected channel´; this can then be con-
firmed in the course of normal operation via a selection box in the top line.

11.4.1 Functions

Measured value
Smoothing (see 13.2.2)
Channel designation (see 13.2.1)
Max. value, min. value (see 13.2.3)
Max., min., date, time-of-day (s. 13.2.3)
Average value (see 14.4.2)
Number (see 14.4.1)
Averaging mode (see 13.2.4)
Atmospheric pressure (see 12.2.6)
Temp. compensation (see 12.2.5)
Setpoint (see 12.2.4)
Conversion rate (see 10.1.1)
Scan cycle (see 10.1.2)
Output cycle (see 10.1.3)
Cycle factor (see 10.1.3.1)
Effective cycle
38 ALMEMO
Actual measuring duration (see 13.4.2.1)
Start time / stop time (see 9.4.1)
Fixed measuring period (see 9.4.2)
Locking level (see 12.2.6)
Quantities (see 12.2.13)
Limit value, max. / min. (see 12.2.7)
Limit value actions, max. / min. (see 12.2.8)
Base value, factor, exponential (see 12.2.11)
Zero-point, gain (see 12.2.10)
Analog output - start / end (see 12.2.9)
Number (see 9.1.6)
File name (see 9.1.5)
Memory free (see 10.5)
Device designation (see 12.6.6.1)
Cross-section area in cm2 (see 13.5)
® 710