Safety Instructions - Ahlborn ALMEMO 2490-2 Operating Instructions Manual

4. SAFETY INSTRUCTIONS

DANGER Danger to life and limb, risk of damage to equipment
Read the instructions carefully before starting to operate
the device.
Please ensure that you comply with all general safety ad-
vice and the special safety instructions included in other
chapters.
Such risks may occur in the following circumstances :
DANGER Risk of fatal injury caused by dangerously high voltage
Such risks may occur in the following circumstances :
DANGER Warning - explosive atmospheres or substances
In the vicinity of various fuels or chemicals there is a risk of ex-
plosion.
Do not use the device in the close vicinity of blasting work or
filling stations!
Failure to heed the operating instructions and all the
•
safety notes these contain
Any form of unauthorized tampering or alteration in-
•
side the device
Use of the device in environments or conditions for
•
which it is not suited
Use of the device with an unsuitable power supply
•
and / or in conjunction with unsuitable peripheral
equipment
Use of the device for any purpose other than that for
•
which it is intended
Damage caused by electrostatic discharge or light-
•
ning.
Use of the device with an unsuitable power supply and
•
/ or in conjunction with unsuitable peripheral equip-
ment
Damage caused by electrostatic discharge or lightning
•
Do not run sensor lines in the vicinity of high-voltage
•
power cables.
Before you touch any sensor lines, ensure that all stat-
•
ic electricity has been discharged.
Safety instructions
ALMEMO ® 2490 7