Setting A Local User Password In Interactive Mode; Displaying And Maintaining Password Control - HP 5120 SI Series Security Configuration Manual

To do...
Set the password aging time for
super passwords
Configure the minimum length for
super passwords
Configure the password
composition policy for super
passwords

Setting a local user password in interactive mode

You can set a password for a local user in interactive mode. When doing so, you need to confirm the
password.
Follow these steps to set a password for a local user in interactive mode:
To do...
Enter system view
Create a local user and enter local
user view
Set the password for the local user
in interactive mode

Displaying and maintaining password control

To do...
Display password control
configuration information
Display information about users
blacklisted due to authentication
failure
Delete users from the blacklist
Clear history password records
Use the command...
password-control super aging
aging-time
password-control super length
length
password-control super
composition type-number
type-number [ type-length
type-length ]
Use the command...
system-view
local-user user-name
password
Use the command...
display password-control [ super ]
[ | { begin | exclude | include }
regular-expression ]
display password-control blacklist
[ user-name name | ip
ipv4-address | ipv6 ipv6-address ]
[ | { begin | exclude | include }
regular-expression ]
reset password-control blacklist
[ all | user-name name ]
reset password-control
history-record [ user-name name |
super [ level level ] ]
202
Remarks
Optional
By default, the super password
aging time is the same as the
global password aging time.
Optional
By default, the minimum super
password length is the same as the
global minimum password length.
Optional
By default, the super password
composition policy is the same as
the global password composition
policy.
Remarks
—
—
Required
Remarks
Available in any view
Available in any view
Available in user view
Available in user view