Sample Channel Scanner Setup Procedure - Anritsu MS2024A/MS2026A User Manual

10-2 Sample Channel Scanner Setup Procedure

10-2 Sample Channel Scanner Setup Procedure
The following procedure demonstrates a common channel scanner setup.
1. On the VNA Master, select the
2. Use the directional arrow keys or the rotary knob to highlight
the key to select.
Enter
3. Press the
Scanner
signal standard and channel numbers or by entering a start frequency, frequency step
size and bandwidth. The channels can be customized using the
. For this example, select the channels by pressing the
Custom Setup
key, then the
4. Select the
Number of Channels
5. Select the
Amplitude
the channels is displayed on the screen.
6. Select the
Measurements
7. Press the
Display
graph format.
8. Press the
Channel Units
channel format.
9. Press the
Units Display
for each channel.
10. Press the
Color Code
Measurements can be made when the base station is in service, out of service, or
Note
over the air.
10-2
Shift
key to activate the Scanner menu. The power can be scanned using a
soft key. Select the
Signal Standard
soft key and enter 20.
key and set the Reference Level and Scale so that the power of all
key to activate the Measurement menu.
soft key and select
soft key and select
soft key and choose
soft key and select
Chapter 10 — Channel Scanner, Option 27
key, then the
Mode
CDMA US PCS
display to display the measurements in the
Graph
to display the measurements in
Channel
to display the maximum measured power
Max
to display the measurements in dual colors.
Dual
MS20xxA VNA Master UG 10580-00166 Rev. C
(9) key.
Channel Scanner
Scan Custom List
Scan Channels
signal standard.
and press
or
soft