Anritsu MS2024A/MS2026A User Manual page 172

4-32 System
Factory Defaults
Restores the instrument to the factory default values, including Ethernet,
language and brightness settings. Press the
and turn the unit off, then on again to complete. Press
normal operation without resetting.
Master Reset
This will restore factory setting to all system parameters, including
Time/Date, Ethernet, language and brightness settings. Also, all user files
in the internal memory are deleted, and the original language and antenna
files are restored. Press the
off, then on again to complete. Press
without resetting.
Update OS Via Ethernet
This soft key should only be used in conjunction with Anritsu Master
Software Tools (MST) to update the instrument operating system using an
Ethernet connection. Use this soft key only as instructed by MST.
Update OS Via USB
This soft key should only be used in conjunction with Anritsu Master
Software Tools (MST) to update the instrument operating system using a
connected USB device. Use this soft key only as instructed by MST.
Back
Returns to the previous menu.
4-60
Chapter 4 — Spectrum Analyzer
Enter
key to initiate the reset, and turn the unit
Enter
to return to normal operation
Esc
MS20xxA VNA Master UG 10580-00166 Rev. C
key to initiate the reset,
to return to
Esc