Anritsu MS2024A/MS2026A User Manual page 145

Chapter 4 — Spectrum Analyzer
files causes the "copy to destination" to be automatically changed if the selected
storage location is the same as the selected current location.
Copy to Destination Int USB CF
This choice lets you select where measurements and setups in the "current
location" will be copied. The "current location" and the "copy to destination" may
not be the same. If you change the destination to which the instrument will copy
files, the current location is automatically changed if the current location is the
same as the selected copy to destination.
Copy From Current Location To Destination
Pressing this soft key causes all measurements, setups and jpg files stored in the
user selected "current location" to be copied to the "copy to destination". If no
storage module is installed in the instrument, an error message is displayed.
Format Compact Flash
This selection erases all files on an installed Compact Flash module. A message
is displayed warning that all files will be erased. Press Enter to confirm that you
want to erase and Esc to quit without erasing. In addition to erasing all files
stored on the Compact Flash, the /usr directory is created for storage of
measurements, setups and jpg files.
Back
The Back key returns to the previous menu.
MS20xxA VNA Master UG 10580-00166 Rev. C
4-23 File
4-33