Chapter 1 - General Information; Introduction - Anritsu MS2024A/MS2026A User Manual

Chapter 1 — General
Information

1-1 Introduction

This chapter covers general information including a description, optional accessories,
preventive maintenance. ESD verifications, and calibration requirements for the VNA Master
models listed below. This user guide supports both VNA Master plus VNA Master plus
Spectrum Analysis models. Throughout this manual, the following terms apply:
• VNA Master or MS20xxA refers to the MS2024A, MS2026A, MS2034A, or
MS2036A
• MS202xA refers to either the MS2024A or MS2026A
• MS203xA refers to either the MS2034A or the MS2036A
Table 1-1. Analyzer Frequency Range
Model
MS2024A 2 MHz to 4 GHz
MS2026A 2 MHz to 6 GHz
MS2034A 2 MHz to 4 GHz
MS2036A 2 MHz to 6 GHz
Note 1: Units with serial numbers below 073700 sweep down to 100 kHz only.
MS20xxA VNA Master UG 10580-00166 Rev. C
Vector Network Analyzer
Frequency Range
Spectrum Analyzer
Not Applicable
Not Applicable
9 kHz to 4 GHz (Note 1)
9 kHz to 7.1 GHz (Note 1)
1-1