Anritsu MS2024A/MS2026A User Manual page 38

1-15 Battery Replacement
The battery supplied with the VNA Master may need charging before use. The battery can be
charged in the VNA Master
adapter (806-141), or separately in the optional Dual Battery Charger (2000-1374).
When using the Automotive Cigarette Lighter 12 VDC Adapter, Anritsu Part
CAUTION:
Number 806-141, always verify that the supply is rated for a minimum of
60 Watts at 12 VDC, and that the socket is clear of any dirt or debris. If the
adapter plug becomes hot to the touch during operation, then discontinue use
immediately.
Use only Anritsu approved batteries, adapters and chargers with these
CAUTION:
instruments.
1-16
using either the AC-DC Adapter (40-168) or the 12 Volt DC
,
MS20xxA VNA Master UG 10580-00166 Rev. C
Chapter 1 — General Information