Measurement; Wait Markers Set/Clear: Setm, Clearm - Siemens sinumerik 840d Programming Manual

Motion-Synchronous Action
10
10.4 Actions within synchronized actions
840D 840D
NCU 571 NCU 572
NCU 573

10.4.24 Measurement

Compared with use in traverse blocks of the part
program, the measuring function can be activated
and deactivated as required.
• Axial measurement without deletion of distance-
to-go:
MEAWA[axis]=(mode, trigger event_1, ..._4
• Continuous measurement without deletion of
distance-to-go:
MEAC[axis]=(mode, measurement memory, trigger event_1, ..._4
For further information on measuring: see Chapter 5, "Extended Measuring Function"

10.4.25 Wait markers set/clear: SETM, CLEARM

Function
SETM(MarkerNumber)
CLEARM(MarkerNumber)
In synchronized actions, wait markers can be set or
deleted for the purpose of coordinating channels, for
example.
SETM
The SETM command can be written in the part
program and in the action part of a synchronized
action. It sets the marker MarkerNumber for the
channel in which the command executes.
CLEARM
The CLEARM command can be written in the part
program and in the action part of a synchronized
action. It resets the flag MarkerNumber for the
channel in which the command executes.
10-384
FM-NC 810D 840Di
Set wait marker for channel
Clear wait marker for channel
SINUMERIK 840D/840Di/810D/FM-NC Programming Guide Advanced (PGA) – 04.00 Edition
08.97
10
 Siemens AG 2000. All rights reserved