Siemens sinumerik 840d Programming Manual page 505

12.98
15
SR Sparking-out retraction path for
synchronized action
SRA Sparking-out retraction path with input
axial for synchronized action
ST Sparking-out time for synchronized action Real,
STA Sparking out time axial for synchronized
action
START Start selected programs simultaneously in several
channels from current program
STAT Position of articulated joints
1
STARTFIFO Execute; fill preprocessing buffer in parallel
STOPFIFO Stop processing; fill preprocessing buffer until
STARTFIFO, preprocessing buffer "full" or end of
program is detected
STOPRE Stop preprocessing until all prepared blocks are
executed in main run.
STOPREOF Stop preprocessing OFF
STRING Data type: String
STRLEN Define string length
SUBSTR Define index of character in input string
SUPA Suppression of current zero offset
SYNFCT Evaluation of a polynomial as a function
of a condition in the motion-synchronous
action
SYNR The variable is read synchronously, i.e. at
execution time (synchronous read)
SYNRW The variable is read and written
synchronously, i.e. at execution time
(synchronous read-write)
SYNW The variable is written synchronously, i.e.
at execution time (synchronous write)
T Call tool
(change only if so defined in machine
data; otherwise M6 command required)
 Siemens AG 2000. All rights reserved
SINUMERIK 840D/840Di/810D/FM-NC Programming Guide Advanced (PGA) – 04.00 Edition
Real,
without sign
without sign
ineffective for the
local channel
Integer
Max. 200
characters
INT
Real String: Parameter
1, character:
Parameter 2
incl. programm.
offsets, handwheel
offsets (DRF),
external zero
offsets and
PRESET offset
VAR REAL
1 ... 32 000 Call via T No.:
or via tool name:
15.1 List of instructions
SRA[Y]=0.2
E.g. T3 or T=3
E.g. T="DRILL"
Tables
15
s
m
s
m
s
m 4
m 4
s 9
15-505