Use Of M Commands - Siemens sinumerik 840d Programming Manual

08.97
12
840 D
NCU 572
NCU 573

12.1.2 Use of M commands

By using macro technology, you can also use M
commands instead of language commands:
DEFINE M22 AS SON
DEFINE M122 AS SONS
DEFINE M25 AS PON
DEFINE M125 AS PONS
DEFINE M26 AS PDELAYON
DEFINE M20 AS SPOF
DEFINE M23 AS SPOF
 Siemens AG 2000. All rights reserved
SINUMERIK 840D/840Di/810D/FM-NC Programming Guide Advanced (PGA) – 04.00 Edition
12.1 Activation, deactivation
840Di
Nibbling on
Nibbling with leader on
Punching on
Punching with leader on
Punching on with delay
Punching, nibbling off
Punching, nibbling off
Punching and Nibbling
12
12-419