Supporting Functions For Stock Removal; Tables - Siemens sinumerik 840d Programming Manual

User Stock Removal Programs
14

14.1 Supporting functions for stock removal

840D 840D
NCU 571 NCU 572
NCU 573
14.1 Supporting functions for stock removal
User stock removal programs
Preprogrammed stock removal programs are
provided for stock removal. You can also use the
following functions to develop your own stock
removal programs.
CONTPRON
CONTDCON
INTERSEC
EXECTAB
CALCDAT
You can use these functions universally, not just for
stock removal.
14-464
FM-NC 810D 840Di
Activate tabular contour preparation (11 columns)
Activate tabular contour decoding (6 columns)
Calculate intersection of two contour elements
(Only for tables created by CONTPRON).
Block-by-block execution of contour elements of a table
(Only for tables created by CONTPRON).
Calculate radii and center points
SINUMERIK 840D/840Di/810D/FM-NC Programming Guide Advanced (PGA) – 04.00 Edition
12.98
14
 Siemens AG 2000. All rights reserved