Siemens sinumerik 840d Programming Manual page 126

File and Program Management
3
3.2 Program memory
840D 840D
NCU 571 NCU 572
NCU 573
Creating workpiece directories on an external PC
The steps described below are performed on an
external data station.
Please refer to your Operator's Guide for file and
program management (from PC to control system)
directly on the control.
;$PATH instruction
The destination path $PATH=... is specified within
the second line of the file.
Example:
;$PATH=/_N_WCS_DIR/_N_SHAFT_WPD
The file is stored at the specified path.
Important
If the path is missing, files of file type SPF are stored
in /_N_SPF_DIR
working memory and all other files in /_N_MPF_DIR.
Example with path for the previous example SHAFT:
%_N_SHAFT_MPF
;$PATH=/_N_WCS_DIR/_N_SHAFT_WPD
N10 G0 X... Z...
•
M2
•
•
%_N_SHAFT_SPF
3-126
FM-NC 810D 840Di
files with extension _INI in the
,
SINUMERIK 840D/840Di/810D/FM-NC Programming Guide Advanced (PGA) − 04.00 Edition
08.97
3
Siemens AG 2000. All rights reserved