Siemens sinumerik 840d Programming Manual page 492

Tables
15
15.1 List of instructions
FPO Feed characteristic programmed via a
polynomial
(feed polynomial)
FPR Rotary axis identification
FPRAOF Deactivate revolutional feedrate
FPRAON Activate revolutional feedrate
FRAME Data type to define the coordinate system
FRC Feed for radius and chamfer
FRCM Feed for radius and chamfer modal
FTOC Change fine tool offset
FTOCOF Online fine tool offset OFF
1,6
(fine tool offset OFF)
6
FTOCON Online fine tool offset ON
(fine tool offset ON)
FXS Travel to fixed stop ON (fixed stop)
FXST Torque limit for travel to fixed stop
(fixed stop torque)
FXSW Monitoring window for travel to fixed stop
(fixed stop window)
15-492
Real Quadratic, cubic
polynomial
coefficient
0.001 ...
999999.999
Contains for each
geometry axis:
Offset, rotation,
angle of shear,
scaling, mirroring;
For each special
axis:
Offset, scaling,
mirroring
As a function of a
3rd degree
polynomial defined
with FCTDEF
Integer, 1 = select,
without sign 0 = deselect
% Optional setting
mm, inch or Optional setting
degree
SINUMERIK 840D/840Di/810D/FM-NC Programming Guide Advanced (PGA) – 04.00 Edition
12.98
FPR (rotary axis)
 Siemens AG 2000. All rights reserved
15
s
m
m 33
m 33
m
m