Siemens sinumerik 840d Programming Manual page 349

12.97
10
840 D 840D
NCU 571 NCU 572
NCU 573
• Activation, deactivation, parameterization of axis
coupling: Leading value coupling, coupled-axis
motion
• Activation/deactivation of axial measuring
function
• Software cams
• Delete distance-to-go without stopping
preprocessing
• Single-axis programs, technology cycles
• Synchronized actions active in JOG mode
beyond the boundaries of the program
• Synchronized actions that can be influenced from
the PLC
• Protected synchronized actions
• Expansion for overlaid motion / clearance control
 Siemens AG 2000. All rights reserved
SINUMERIK 840D/840Di/810D/FM-NC Programming Guide Advanced (PGA) – 04.00 Edition
FM-NC 810D 840Di
CCU2
Motion-Synchronous Action
10.1 Structure, basic information
10
10-349