Siemens sinumerik 840d Programming Manual page 18

Preface 04.00
0 0
Structure of the manual
For your information
Your SIEMENS 840D/840Di/810D or FM-NC is state of
the art and is manufactured in accordance with
recognized safety regulations, standards and
specifications.
Additional devices
SIEMENS offers special add-on equipment, products
and system configurations for the focused expansion of
SIEMENS controls in your field of application.
Personnel
Only specially trained, authorized and experienced
personnel may work on the control. This applies at all
times, even for short periods.
It is necessary to clearly define the respective
responsibilities of the personnel for setting up,
operation and maintenance; it is necessary to
supervise the compliance thereof.
Actions
Before the control is started up, it should be ensured
that the Operator' Guides have been read and
understood by the people responsible. In addition,
operation must be conducted under constant
supervision regarding the overall technical state (faults
and damages visible from outside, as well as changes
in operation behavior) of the control.
 Siemens AG 2000. All rights reserved
0-18
SINUMERIK 840D/840Di/810D/FM-NC Programming Guide Advanced (PGA) – 04.00 Edition