Spindles - Siemens sinumerik 840d Programming Manual

04.00
15
15.2.34

Spindles

Identifier Type
$P_GWPS BOOL
$P_NUM_SPINDL INT
ES
$P_MSNUM INT
$AC_MSNUM INT
$P_S REAL
REAL
$AA_S
$P_SDIR INT
$AC_SDIR INT
$P_SEARCH_S REAL
INT
$P_SEARCH_SDI
R
INT
$P_SEARCH_SG
EAR
 Siemens AG 2000. All rights reserved
SINUMERIK 840D/840Di/810D/FM-NC Programming Guide Advanced (PGA) – 04.00 Edition
Description: System variable/value range/index
$P_GWPS[n]
Constant grinding wheel surface speed on if TRUE
n: Spindle number, 0 – max. spindle number
$P_NUM_SPINDLES[n]
Number of spindles in the channel
$P_MSNUM
Return value:
0: No spindle exists
1..n: Number of the master spindle
$AC_MSNUM
Return value:
0: No spindle exists
1..n: Number of the master spindle
$P_S[n]
Last programmed spindle speed
n: Spindle number, 0 – max. spindle number
$AA_S[n]
Spindle act. speed. The sign corresponds to the direction of rotation.
n: Spindle number, 0 – max. spindle number
$P_SDIR[n]
Last direction of spindle rotation to be programmed.
3: Clockwise rotation, 4: Counterclockwise rotation, 5: Spindle stop
n: Spindle number, 0 – max. spindle number
$AC_SDIR[n]
Spindle rotation direction currently active
3: Clockwise rotation, 4: Counterclockwise rotation, 5: Spindle stop
n: Spindle number, 0 – max. spindle number
$P_SEARCH_S[n]
accummulated last progr. spindle speed for block search (SSL)
0: Spindle standstill, 0 – last programmed spindle speed
$P_SEARCH_SDIR[n]
accum. last programmed spindle direction of rotation for block search
3: M3 output speed control mode
4: M4 output speed control mode
5: M5 output speed control mode
–5: Preset spindle not programmed at time of SSL start
–19: M19 output positioning mode
70: M70 output axis mode
n: Spindle number, 0 – max. spindle number
$P_SEARCH_SDIR[n]
accumm. last programmed spindle gear stage M function for SSL
40: M40 automatic gear stage change
41: M41 as predefined gear stage in part program
42: M42 as predefined gear stage in part program
43: M43 as predefined gear stage in part program
44: M44 as predefined gear stage in part program
45: M45 as predefined gear stage in part program
n: Spindle number, 0 – max. spindle number
15.2 List of system variables
Part pro
R
R
R
RS
R
RS
R
RS
R
R
R
Tables
15
Sync O S
2
5
3
5
.
2
R 3
2
R 4
3
R 3
5
.
3
5
.
3
5
.
3
15-555