Magazine Module Parameter; Measuring System Compensation Values - Siemens sinumerik 840d Programming Manual

Tables
15
15.2 List of system variables
15.2.14

Magazine module parameter

Identifier Type
$TC_MAMP1 STRIN
G
$TC_MAMP2 INT
$TC_MAMP3 INT
Adapter data
INT
$TC_ADPTT
REAL
$TC_ADPT1
$TC_ADPT2 REAL
$TC_ADPT3 REAL
15.2.15

Measuring system compensation values

REAL
$AA_ENC_COMP
REAL
$AA_ENC_COMP
_STEP
$AA_ENC_COMP REAL
_MIN
$AA_ENC_COMP REAL
_MAX
15-534
Description: System variable/value range/index
$TC_MAMP1
Identifier of the magazine module
Scalar variable
$TC_MAMP2
Type of tool search
Scalar variable
$TC_MAMP3
Handling of tools with wear groups
Scalar variable
$TC_ADPTT[a]
Adapter transformation number
a: Adapter number 1–32000
$TC_ADPT1[a]
Adapter geometry: Length 1
a: Adapter number 1–32000
$TC_ADPT2[a]
Adapter geometry: Length 2
a: Adapter number 1–32000
$TC_ADPT3[a]
Adapter geometry: Length 3
a: Adapter number 1–32000
$AA_ENC_COMP[n,m,a]
Compensation values
a: Machine axis
n: Encoder no. 0–1
m: Point no. 0 – <MD value>
Axes: Machine axis
$AA_ENC_COMP_STEP[n,a]
Step width
a: Machine axis
n: Encoder no. 0–1
Axes: Machine axis
$AA_ENC_COMP_MIN[n,a]
Compensation start position
a: Machine axis
n: Encoder no. 0–1
Axes: Machine axis
$AA_ENC_COMP_MAX[n,a]
Compensation end position
a: Machine axis
n: Encoder no. 0–1
Axes: Machine axis
SINUMERIK 840D/840Di/810D/FM-NC Programming Guide Advanced (PGA) – 04.00 Edition
04.00
15
Part pro Sync O S
R W 2
R W 2
R W 5
R W 5
R W 5
R W 5
R W 5
R W 2
R W 2
R W 2
R W 2
 Siemens AG 2000. All rights reserved