Tool Management - Siemens sinumerik 840d Programming Manual

04.00
15
15.2.30

Tool management

Identifier Type
$AC_TC_FCT INT
$AC_TC_STATUS INT
$AC_TC_THNO INT
INT
$AC_TC_TNO
$AC_TC_MFN INT
$AC_TC_LFN INT
$AC_TC_MTN INT
INT
$AC_TC_LTN
INT
$AC_TC_MFO
$AC_TC_LFO INT
$AC_TC_MTO INT
INT
$AC_TC_LTO
 Siemens AG 2000. All rights reserved
SINUMERIK 840D/840Di/810D/FM-NC Programming Guide Advanced (PGA) – 04.00 Edition
Description: System variable/value range/index
$AC_TC_FCT
Command number. Specifies which action is desired.
$AC_TC_STATUS
Status of command – read via $AC_TC_FCT.
$AC_TC_THNO
Number of the toolholder (spec. the spindle no.) where the new tool is
to be changed.
$AC_TC_TNO
NCK-internal T number of new tool (to be changed).
0: There is no new tool.
$AC_TC_MFN
Source magazine number of new tool.
0: There is no new tool.
$AC_TC_LFN
Source location number of new tool.
0: There is no new tool.
$AC_TC_MTN
Target magazine number of new tool.
0: There is no new tool.
$AC_TC_LTN
Target location number of new tool.
0: There is no new tool.
$AC_TC_MFO
Source magazine number of old tool (to be changed).
0: There is no old tool.
$AC_TC_LFO
Source location number of old tool (to be changed).
0: There is no old tool.
$AC_TC_MTO
Target magazine number of old tool (to be changed).
0: There is no old tool.
$AC_TC_LTO
Target location number of old tool (to be changed).
0: There is no old tool.
15.2 List of system variables
Part pro
RS
RS
RS
RS
RS
RS
RS
RS
RS
RS
RS
RS
Tables
15
Sync O S
R 5
R 5
R 5
R 5
R 5
R 5
R 5
R 5
R 5
R 5
R 5
R 5
15-551