Siemens sinumerik 840d Programming Manual page 129

08.97
3
840D 840D
NCU 571 NCU 572
NCU 573
Generating an initialization program on an
external PC
The data area identifier and the data type identifier
can be used to determine the areas which are to be
treated as a unit when the data are saved.
Example:
_N_AX5_TEA_INI
_N_CH2_UFR_INI
_N_COMPLETE_TEA_INI
When the control is started up initially, a set of data
is automatically loaded to ensure proper operation of
the control.
Saving initialization programs
The files in the working memory can be saved on an
external PC and read in again from there.
• The files are saved with COMPLETE.
• An INI file: INITIAL can be created across all
areas with _N_INITIAL_INI.
Loading initialization programs
INI programs can also be selected and called as part
programs if they only use the data of a single
channel. It is thus also possible to initialize program-
controlled data.
Information on file types is given in the Operator's
Guide.
Siemens AG 2000. All rights reserved
SINUMERIK 840D/840Di/810D/FM-NC Programming Guide Advanced (PGA) − 04.00 Edition
FM-NC 810D 840Di
File and Program Management
3.3 User memory
Machine data for axis 5
Frames of channel 2
All machine data
3
3-129