Camera Track Mode With Auto Framing; Support For Avaya Hc010 Usb Camera - Avaya CU360 Release Notes

© 2021 Avaya Inc. All rights reserved
Figure 46: USB A/V Bar Mode Active – Web
The remote-control key
not connected to a monitor. As an alternative, press on the Exit buttons on the UX/Web interface

Camera Track Mode with Auto Framing

In this release, in addition to the possibility to track the active speaker in front of the device with
the embedded camera, it is also possible to activate the automatic framing for the CU360 App.
The automatic framing recognizes the people sitting in front of the device by their faces and finds
the best framing to include all of them.
See Auto Framing section.

Support for Avaya HC010 USB Camera

You can connect an external USB camera, officially supported for Avaya XT Series (Logitech
C920, C930e or Avaya HC020/HC050 and now the latest Avaya HC010) to the CU360 device.
To enable an additional USB camera, browse to
[G
[W
•
•
Figure 47: How to Enable a USB camera as Additional Camera
The USB cameras are opened at up to 720p@30 in this release and can be used as an additional
live camera in the CU360 app.
Presets for the USB camera can be saved and recalled.
Release Notes for Avaya Collaboration Unit CU360
can be used to easily stop USB Bar Mode even when the CU360 is
•
Caution
•
Do not unplug the USB type-C cable from the PC while the USB Bar mode is
active. In some cases, this could cause the CU360 to hang or reboot.
] C > A > I/O
UI ONFIGURE DVANCED
] [A L ] A
EB DMIN OGIN DMINISTRATOR
Enable: Yes*/No
Control Camera: Yes/No*
> C > USB
CONNECTION AMERAS
S > I/O > C
ETTINGS CONNECTION AMERAS
> USB
What's New 53