Adding Reservation Groups; Setting Up The Call Branding Table Using Reservation Groups - Avaya CS700 Administration And Maintenance

Configuring Channels and Call Routing

Adding Reservation Groups

In order to identify a reservation group in the call branding table, you must first add the required
Reservation Groups to the server using the following utility:
su brdgdbo
cd /usr/dcb/dbase/bridgedb
./resgroup_util.sh -a -r 1
Bridge returns the following message:
Reservation Group with Ref=1 successfully added!
Add each additional reservation group as shown above.
New Reservation Groups can be numbered from 1 to 999.

Setting up the Call Branding Table Using Reservation Groups

Once the Reservation Groups are added, you will now brand the Call Branding Table.
The following example shows how the call branding table might look using 3 Reservation
Groups:
The 4001 DNIS will be used by the Marketing group and will be associated with Res Group 1.
The 4002 DNIS will be used by the Sales group and will be associated with Res Group 2.
The 4003 DNIS will be used by the Support group and will be associated with Res Group3.
It is now possible to schedule all three Acme groups at the same time using the same
conference passcodes. As long as each reservation uses a different Reservation Group, they
can share the same conference passcodes.
94 Administration and Maintenance of the S700/780 Audio Conferencing Server