5.20.1 Defining Programmable Key #6 As A Vocanom Speed Dial - AudioCodes 430HD User Manual

3. Press the navigation control's left or right rim to navigate to and select Key Event:
4. In the 'Key Label' field, define an identifier that you'll easily identify in the LCD, e.g., 'Dialed',
as shown in the screen below.
5. Navigate down to the 'Key Event' field and then press the navigation control's left or right rim
to navigate to and select the Key Event you want to define, for example, 'Dialed Calls':
6. Press the Save softkey; the LCD reverts to idle mode displaying the 'Dialed' Key Event you
defined ('Dialed', in this example):

5.20.1 Defining Programmable Key #6 as a VocaNOM Speed Dial

You can configure programmable key #6 as a VocaNOM speed dial for quicker and friendlier
voice dialing ability.

To configure VocaNOM Programmable Key #6:
1. Long-press the sixth Programmable Key located to the right of the LCD below the fifth
and fourth keys; the Programmable Key screen is displayed in the LCD.
2. Press the navigation control's left rim to navigate to and select the Key Event Vocanom
as shown in the figure below.
3. Enter the VocaNOM Number and press the Save softkey; VocaNOM is displayed in the
phone LCD as shown in the figure below.
User's Manual 64
430HD and 440HD IP Phone
Document #: LTRT-11938