Configuring Programmable Key #6 As A Vocanom Speed Dial; Figure 3-21: Web Interface - Programmable Keys; Figure 3-22: Web Interface - Programmable Keys - Vocanom - AudioCodes 400HD Series Administrator's Manual

6. In the 'Paging Multicast' field, enter the paging group's multicast IP address.
Default = 224.0.1.0. For phones to be in a group, all must be configured with the
same multicast address.
7. In the 'Paging Port' field, enter the group's port. Default: 8888. For phones to be
in a group, all must be configured with the same port.
8. Click Submit.
3.2.4.6

Configuring Programmable Key #6 as a VocaNOM Speed Dial

You can configure programmable key #6 as a VocaNOM speed dial for quicker and
friendlier calling ability.
Note: This section only applies to the 430HD/440HD/440+HD phones.
To configure a VocaNOM Programmable Key using the Web interface:

1. Open the Programmable Keys page (Configuration tab > Personal Settings
menu > Programmable Keys).
2. From the 'Line Key' dropdown, select 6. Only the sixth Line Key can be
programmed as a VocaNOM speed dial.

Figure 3-22: Web Interface - Programmable Keys - VocaNOM

1. From the 'Key Type' dropdown, select VocaNom.
2. In the 'VocaNOM Number' field that opens, enter the speed dial number to dial in
order to receive the voice service, e.g., 4444, and then click the Submit button;
VocaNOM is displayed in the phone LCD.
To configure a VocaNOM Programmable Key in the phone LCD:

1. Long-press the sixth Programmable Key located to the right of the LCD below the
fifth and fourth keys; the Programmable Key screen is displayed in the LCD with
VocaNOM by default selected.
2. Press the Select softkey and then enter the VocaNOM Number and press the
Save softkey; VocaNOM is displayed in the phone LCD.
Administrator's Manual

Figure 3-21: Web Interface - Programmable Keys

400HD Series for Skype for Business
56 Document #: LTRT-09940