Setting Date And Time - AudioCodes 420HD User Manual

4.4

Setting Date and Time

You can manually set date and time displayed on the phone. If a Network Time Protocol (NTP)
server is deployed and enabled by your administrator, however, then date and time are
automatically retrieved over the Internet from the server and manually setting them will not be
possible. You'll receive this message:
Notes:
• It's recommended to implement an NTP server (system administrators can see the
Administrator's Manual for detailed information).
• If date and time are manually set, the settings are not retained after rebooting the phone or
powering off. You will need to manually reset date and time if you reboot or power off.

To set date and time:
1. Access the Date and Time screen (MENU key > Settings > Date and Time).
2. Navigate down to the Date format option and set European or American.
3. Navigate to the Date option and modify using the Clear softkey.
4. Navigate to the Time option. The time is in the format hhmmss. Modify using the Clear
softkey.
5. Navigate to the Time format option.
6. Press the navigation control's left rim to change the format from 24h to 12h if required, or
press the Select soft key.
7. Press the Save softkey to apply your setting.
User's Manual 30
420HD IP Phone
Document #: LTRT-11889