Defining Date And Time - AudioCodes 300HD Series User Manual

User's Manual
4.3

Defining Date and Time

You can manually change the displayed date and time if Network Time Protocol (NTP) is not
used (see note below).
Notes:

To define the date and time:
1. Access the Date and Time screen (MENU key > Settings menu > Date and Time
submenu).
2. Select the Date option, and then modify the date using the Clear softkey. The date is in the
format MMDDYYYY.
Version 1.6.0
•
Typically, the phone retrieves the date and time from a Network Time
Protocol (NTP) server over the Internet. This is the recommended setting
and is configured by your system administrator (see the Administrator's
Manual). If NTP is configured, then manual setting of the data and time is
not possible.
•
For manual configuration of date and time, the settings are not retained after
a phone reboot. Thus, after a phone reboot, you need to re-configure the
date and time.
29
4. Customizing Your Phone
January 2012