4.4
Setting Date and Time
You can manually set date and time displayed on the phone. If a Network Time Protocol (NTP)
server is deployed and enabled by your administrator, however, then date and time are
automatically retrieved over the Internet from the server and manually setting them will not be
possible. You'll receive this message:
Notes:
•
It's recommended to implement an NTP server (system administrators can see the
Administrator's Manual for detailed information).
•
If date and time are manually set, the settings are not retained after rebooting the phone or
powering off. You will need to manually reset date and time if you reboot or power off.
To set date and time:
1.
Access the Date and Time screen (MENU key > Settings > Date and Time).
2.
Select the Date option and modify using the Clear softkey. The date format is DDMMYYYY.
3.
Navigate to the Time option. The time is in the format HHMM. Modify using the Clear
softkey. To change alphanumerical mode, see Section 3.4.
4.
Navigate to the Time format option.
5.
Press the navigation control's left rim to change the format from 24h to 12h if required, or
press the Select soft key.
6.
Press the Save softkey to apply your setting.
User's Manual
26
405 and 405HD IP Phone
Document #: LTRT-12045