Rear View; Figure ‎ 2 -2: Rear View; Table ‎ 2 -2: Rear View Description - AudioCodes 400HD Series User Manual

User's Manual
Item # Label/Name
7 MENU
8 REDIAL
9 TRANSFER
10 HOLD
11 Alphanumerical
Keypad
12 SPEAKER
13 HEADSET
14 MUTE
▲
VOL
15
VOL
▼
2.2.2

Rear View

The rear view of the phone is shown in the figure below and described in the table below.
# Label
1
2
3
4
5
Version 2.0.1
Accesses menus (1) Call Log (2) Directory (3) Speed Dial (4) Settings (5)
Status (6) Administration.
Accesses a list of recently dialed numbers; one can be selected to redial.
Transfers a call.
Places an active call on hold.
Keys for entering numbers, alphabetical letters and symbols (e.g., colons)
Activates the speakerphone, allowing a hands-free conversation.
Activates a call using an external headset.
Mutes a call.
Increases or decreases the volume of the handset, headset,
speakerphone, ring tone and call progress tones.
Figure ‎ 2 -2: Rear View
1
2
Table ‎ 2 -2: Rear View Description
Handset jack, i.e., RJ-9 port, to connect the handset.
RJ-45 port to connect to the Ethernet LAN cable for the LAN connection
(uplink - 10/100 Mbps). If you're using Power over Ethernet (PoE), power
to the phone is supplied from the Ethernet cable (draws power from either
a spare line or signal line).
RJ-45 port for connecting the phone to a PC (10/100 Mbps downlink).
12V DC power jack that connects to the AC power adapter.
Headset jack, i.e., RJ-9 port that connects to an external headset.
Description
3 4
Description
13
‎ 2 . Setting up the Phone
5
May 2013