Introduction; Certification; Scope Of Manual - Beckman Coulter Allegra X-12 Series Instructions For Use Manual

Certification

To ensure full system quality, Beckman Coulter Allegra X-12 series centrifuges are manufactured in
a registered ISO 9001 or 13485 facility. They have been designed and tested to be compliant (when
used with Beckman Coulter rotors) with the laboratory equipment requirements of applicable
regulatory agencies. Declarations of conformity and certificates of compliance are available at
www.beckmancoulter.com.

Scope of Manual

This manual is designed to familiarize you with the Beckman Coulter Allegra X-12 series
centrifuges, their functions, specifications, operation, and routine operator care and maintenance.
We recommend that you read this entire manual, especially the
information, before operating the centrifuge or performing instrument maintenance.
CHAPTER 1
•
centrifuge, including the operating controls and indicators.
CHAPTER 2
•
centrifuge.
CHAPTER 3
•
CHAPTER 4
•
causes and suggested corrective actions.
CHAPTER 5
•
list of supplies and replacement parts.
NOTE
If the centrifuge is used in a manner other than specified in this manual, the safety and performance
of this equipment could be impaired. Further, the use of any equipment other than that recommended
by Beckman Coulter has not been evaluated for safety. Use of any equipment not specifically
recommended in this manual and/or the applicable rotor manual is the sole responsibility of the user.
GX-IM-5AB
contains system specifications and a brief physical and functional description of the
provides requirements for preparing laboratory facilities and installing the
contains centrifuge operating procedures.
lists diagnostic messages and other possible malfunctions, together with probable
contains procedures for routine operator care and maintenance, as well as a brief

Introduction

Safety Notice and all safety-related
xiii