Beckman Coulter Allegra X-12 Series Instructions For Use Manual page 24

Description
Specifications
Specification
Finishes
Electrical requirements
Electrical supply
Maximum heat dissipation into room
under steady-state conditions
Noise level 0.91 m (3 ft) in front of
centrifuge
Installation (overvoltage) category
Pollution degree
a. During transient conditions, such as acceleration and deceleration, rotor temperature may be outside this range. To reach
temperatures above ambient, the centrifuge is dependent on the frictional heat generated inside the chamber during
operation. At low run speeds or low ambient temperatures, the centrifuge may not be able to achieve some higher
temperatures.
b. Normally only nonconductive pollution occurs; occasionally, however, a temporary conductivity caused by condensation
must be expected.
1-8
Description
• Control panel
— coated polystyrene copolymer
• Housing surfaces
— acrylic baking enamel
• 208-V, 60-Hz instrument
— 187–229 VAC, 9 A, 60 Hz
• 200-V, 50/60-Hz instrument
— 180–220 VAC, 10 A, 50/60 Hz
• 230-V, 50-Hz instrument
— 207–253 VAC, 8 A, 50 Hz
Class I
4100 Btu/hr (1.2 kW)
£ 68 dBa
II
b
2
GX-IM-5AB