Image - Barco RML W6 User Manual

Auto Image Adjust
You can configure the Auto Image Adjust function to one of the following three modes:
Off =NEVER
•
Auto =When not done before(or when done first time)
•
Always =When new source selected or new source connected.
•
For more information on Auto Image Adjust, refer to Chapter VI  Image  Auto Image.

IMAGE

Contrast
Use  to adjust the contrast of the projected image.You can connect the projector to an
external image source to display an image resembling the one shown below for adjustment.
It is recommended that you adjust the projected image according to the results shown below
so that the brightness of the spectrum remains constant throughout and achieve maximum
contrast between black and white.
The following image illustrates the results of direct contrast adjustment using a random
image:
 Lowered contrast
Downloaded From projector-manual.com Barco Manuals
OSD Menu description
Original image Enhanced contrast 
6
33