3. Installation guidelines
•
full pitching allowed (360°)
Full pitching
allowed (360°)
Image 3-2
Pitch possibilities
•
Do not put the projector on either side to project an image
Do not put the projector
to project an image!
Image 3-3
Side projection limitations
3.4
Airflow
Airflow
The Air Intake Vent is located on the bottom side of the projector while the Exhaust Vent can be found on the left rear side of the
projector. Make sure the projector is installed in a location so that the air inlets and outlets for the cooling system are not obstructed.
12
on either side
R59770247 SIM 5H 04/06/2008