2011 Mimaki Engineering Co.,Ltd - MIMAKI UJF-3042 Maintenance Manual

Maintenance Manual > Adjustment > Adjustment Items > DEFAULT SET
Model UJF-3042/FX Issued 2010.08.27 Revised 2011.09.30 F/W ver
4.2.16 DEFAULT SET
 Outline
Returning each parameter to the initial value.
 DEFAULT SET List of Items
No Item
1 SYSTEM param
2 MAINTE param
3 SERVO param
4
FEED param
5 HEAD param
6 INK param. 1
7 INK param. 2
8 SCAN param
9 WAVE PARAM 1
10 WAVE PARAM 2
11 WAVE PARAM 3
12 WAVE PARAM 4
13 SHIPPING set
 Work Procedures
FUNCTION
#ADJUST <ent>
#ADJUST
DEFAULT SET <ent>
#DEFAULT SET
SYSTEM param. <ent>
MAINTE param.
SERVO param.
:
#DEFAULT SET
INITIAL. OK? :ent
Parameter initialized
© 2011 MIMAKI ENGINEERING CO.,LTD.
Operation
Initialize the parameter in question.
Initialize the parameter in question.
Initialize the parameter in question.
Initialize the parameter in question.
Initialize the parameter in question.
Initialize the parameter in question.
Initialize the parameter in question.
Initialize the parameter in question.
Initialize the parameter in question.
Initialize the parameter in question.
Initialize the parameter in question.
Initialize the parameter in question.
Initializing parameters of others than the adjustments.
1. Select [#ADJUST] -> [DEFAULT SET].
2. Select the parameter to be initialized, and then fix it by
[ENTER].
[] / []: Switch
[ENTER]: Confirms (to Confirmation display)
3. Initialize by [ENTER].
[ENTER]: Execute
1.80 / 1.00 Remark
[END]: Return
[END]: Return
Rev.
2.0
Remarks
4.2.16 R.2.0 P.1
1
2
3
4
5
6
7
8