2011 Mimaki Engineering Co.,Ltd - MIMAKI UJF-3042 Maintenance Manual

Maintenance Manual > Disassembly and Reassembly > Driving Parts > Mist Suction Fan Assy
Model UJF-3042/FX Issued 2010.08.27 Revised 2011.09.30 F/W ver
6.3.6 Mist Suction Fan Assy
To turn power off, be sure to turn the main power OFF.
 Procedure
Relay connector
Mist Suction Fan Assy
© 2011 MIMAKI ENGINEERING CO.,LTD.
1. Turn the main power OFF.
2. Remove the following covers:
• Front Cover
• Upper Cover
• Slider PCB Cover
3. Disconnect the relay connector shown in the left figure.
Slider PCB
4. Remove the Mist Suction Fan Assy.
Screw : P3x35SMW x4
5. Perform the assembly by reversing the disassembly procedure.
--- Remark
Mist Suction Fan Assy
 When assembling, pass wiring of the fan under the
ink tube and be careful about wiring not coming
out.
Rev.
2.0
1
2
3
4
5
6
7
8
6.3.6 R.2.0 P.1