MIMAKI UJF-3042 Maintenance Manual page 37

Maintenance Manual > Electrical Parts > Circuit Board Specifications > 3042 Slider Relay PCB Assy.
Model UJF-3042/FX Issued 2010.08.27 Revised 2011.09.30 F/W ver
2.3.5 3042 Slider Relay PCB Assy.
 Outline
Board name :3042 Slider Relay PCB Assy.
Mounted position :Y-Bar part
 Main specifications
This PCB controls the head driving wave shape, the Y motor and other IOs.
Creating wave shape for head driv-
ing
Connecting for Work Area sensor
Connecting for Water cooling sys-
utem of the UV sytem
Connecting for Cover sensor.
Connecting for the Motor
Connection between PCBs
(Serial IO I/F)
Connection between PCBs
(HDC I/F)
Connection between PCBs
(Serial IO I/F)
 List of Connectors
Parts No. Pin
CN1 12 3042 SL-Relay power short Assy
CN2 30 UJF-3042 MAIN PCB Assy
CN3 30
CN4 2 Micro SW(D3M-01K1-3)
CN5 12
CN6 12 UJF-3042 MAIN PCB Assy
CN7 30
CN8 30
CN9 9
CN10 4
© 2011 MIMAKI ENGINEERING CO.,LTD.
HPC
Beem sensor (Light receiving side)
Radiator FAN, Water cooling pump, Float sensor of the subtank
Micro SW
Y-Motor, Y-Encorder
20-pin FFC connection (3042 Station3 PCB connection)
30-pin FFC connection, twisted pair cable connection (LAN cable is used) .
(UJF-3042 MAIN PCB, 3042 Slider PCB)
10-pin FFC connection (3042 Pump3 PCB connection)
Connected to:* Connecting
destination CN
3042 Slider PCB Assy
3042 Slider PCB Assy
3042 Slider PCB Assy
3042 Slider PCB Assy
Not Use
Cartridge sensor Assy
1.80 / 1.00 Remark
Using for Power of the LED-UV.
CN6 HDC IO
CN2 HDC IO
Cover sensor
CN1 Slider Relay PCB - Slider PCB Serializer I/F
CN8 Main PCB - Slider Relay PCB Serializer I/F
CN4 GND etc
CN6 COM wave I/F
JTAG IF (CPLD writing or For FPGA JTAG TEST)
For cartrdge 1
Remarks
2.3.5 R.2.0
Rev.
2.0
1
2
3
4
5
6
7
8
P.1