2011 Mimaki Engineering Co.,Ltd - MIMAKI UJF-3042 Maintenance Manual

Maintenance Manual > Disassembly and Reassembly > Driving Parts > X-axis Motor Assy
Model UJF-3042/FX Issued 2010.08.27 Revised 2011.09.30 F/W ver
6.3.1 X-axis Motor Assy
Encoder Connector
relay connector
coupling
© 2011 MIMAKI ENGINEERING CO.,LTD.
6. Disconnect the Encoder Connector and relay connector, and
L
then take out the motor.
*Disassembling shall be up to the status in the left figure.
X Motor
• As the fixing screw of the coupling to the X motor shaft is
X Motor BKT
7. Perform the assembly by reversing the disassembly procedure.
--- Remark
Remove the motor, taking care not to drop it.
locked, it cannot be removed. Therefore, you cannot remove
the X motor BKT.
 Maintenance parts for replacing the X motor is
provided in the Assy indicated in the left figure.
Rev.
2.0
1
2
3
4
5
6
7
8
6.3.1 R.2.0 P.2