MIMAKI UJF-3042 Maintenance Manual page 211

Maintenance Manual > Troubleshooting > Details on Errors and Malfunctions > List of Error Messages
Model UJF-3042/FX Issued 2010.08.27 Revised 2011.09.30 F/W ver
7.1.2 List of Error Messages
bit Hexadecimal
numeral indi-
cation
bit7 [0080] 37V voltage of the Slider PCB does not come.
(displayed only at startup)
bit8 [0100] Wave shape driver circuit for head 1 Short check NG 1. FFC breakage between SL-Relay PCB and
bit9 [0200] Wave shape driver circuit for head 2 Short check NG
bit10 [0400] Wave shape driver circuit for head 3 Short check NG
bit11 [0800] Wave shape driver circuit for head 4 Short check NG
bit12 [1000] Wave shape driver circuit for head 5 Short check NG
bit13 [2000] Wave shape driver circuit for head 6 Short check NG
bit14 [4000] Wave shape driver circuit for head 7 Short check NG
bit15 [8000] Wave shape driver circuit for head 8 Short check NG
Error display example)
If the F2 fuse of the slider PCB has been blown, "Head Failed [3F88]" is displayed at startup, and then "Head
Failed [0008]" is also displayed.
© 2013 MIMAKI ENGINEERING CO.,LTD.
Reason for error occurrence
1.80 / 1.00 Remark
Cause for occurrence
1. F2 blowout of the SL-Relay PCB.
2. FFC breakage between SL-Relay PCB and
Slider PCB
3. Failure of Slider PCB
4. Failure of SL-Relay PCB
Slider PCB
2. Failure of Slider PCB
3. Failure of SL-Relay PCB
4. Failure of head
*)If 37V power supply route also has a problem,
an error may occur.
Refer to bit6 and bit7 error.
Rev.
2.0
1
2
3
4
5
6
7
8
7.1.2 R.2.0 P.10