Maintenance Manual > Disassembly and Reassembly > Ink-related Parts > Capping
Model UJF-3042/FX Issued 2010.08.27 Revised 2011.09.30 F/W ver
6.2.8 Capping
To turn power off, be sure to turn the main power OFF.
Be sure to wear Protective Glasses and Working Gloves during the work operation.
Ink may get in your eyes depending on the working condition, or hand skin may get rough if you
touch the ink.
Take care not soil the surroundings.
Working Procedure
Method to remove cap by unit
Tube from cap
Cap Base
© 2011 MIMAKI ENGINEERING CO.,LTD.
1. Turn the main power OFF
2. Remove the following covers:
• Front Cover
• Upper Cover
Cap Assy
3. Pull out the tube from the cap from the fitting.
4. Take Cap Base off.
• Screw x4
---
Remark
Cap Assy
Rev.
2.0
1
2
3
4
5
6
7
8
6.2.8
R.2.0
P.1